Categories

False alarms and system hiccups can be exasperating, and even worse, might prevent your security system from working how it should. Luckily, most problems, from false alarms to dead batteries, are straightforward to remedy. Check out our recommendations for troubleshooting your home alarm system in New Brunswick. We’ll help keep your family members protected and your system running the way it should.

Test Your Home Security System In New Brunswick

One of the most sensible ways to troubleshoot your property’s security is to test it! The latest systems let you place them in test mode to avoid initiating an emergency response. After switching to test mode, follow these steps:

• Activate your system as you typically would when you head out.
• Open a door or window that uses a contact sensor, or test other sensors. Close the window or door once you’re done so it doesn’t trip the alarm as you reactivate the system.
• Permit the alarm to sound for 60 seconds to make sure a signal is dispatched to the security company and an entry is made in the alarm system log.
• Continue testing sensors as you wish
• Inspect the alarm’s activity log to validate proper function.

No need to worry, monitoring professionals can tell that your system is being tested. Just make sure to turn test mode off when complete. It’s a good idea to test every other month or anytime you make changes to your home’s phone or internet connectivity.

Inspect The Positioning And State Of Motion Detectors

Although an integral aspect of your alarm system, motion detectors are prone to false alarms. You can help prevent them with a few straightforward troubleshooting steps.

• Perform a physical inspection. Is there something that could move within the sensor’s detection zone, like drapery blown in a breeze?
• Is the sensor clean? Cobwebs, dirt, and grime can cause malfunctions. Check to confirm the device is clean.
• Does the motion detector come with pet immunity you can turn on? Some models can be set to ignore pets weighing as much as 100 pounds.
• When was the battery last replaced? A nearly depleted battery may impact performance or cause false alarms.
• Is a heat source affecting the sensor? Too much heat from a fireplace, direct sun, or something else can trigger an alarm.

Keep Batteries Ready And Look Out For Low Battery Warnings

One of the great things about modern home security systems is that they’ll tell you when batteries are dying. If your system uses a smartphone app or control panel, you’ll usually see notifications there. Depending on your system, you could notice an occasional beep when batteries are low. 

Contact sensors, motion detectors, smoke detectors, and other wireless components have batteries that need to be replaced every 1 to 2 years. It’s best to keep batteries ready and establish a replacement schedule. Top systems also have a backup battery for the main control panel. This battery helps keep your system functioning if your power goes out and should recharge itself once power is back online. If it fails to recharge, you should replace it.

Troubleshooting Is Easy With ADT Home Security In New Brunswick 

As the leading name in home security, ADT creates systems that provide unsurpassed functionality and convenience. Switching to test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always receive updates when a sensor battery is running low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system ideal for your New Brunswick home and family. Place a call to (732) 307-3755 or fill out our form today!