ADT® Authorized Dealer Serving New Brunswick & Surrounding Areas
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your New Brunswick House

Property owners must defend against numerous risks like burglary, flooding, and fire. But what about something that you are unable to smell or see? Carbon monoxide poses a unique challenge as you might never know it’s there. Nevertheless, using CO detectors can simply safeguard your loved ones and property. Learn more about this dangerous gas and where to place carbon monoxide detectors in your New Brunswick property.

What Is Carbon Monoxide?

Called the silent killer as of a result of its absence of color, taste, or odor, carbon monoxide is a commonly found gas formed by the incomplete combustion of fuels. Any appliance that consumes fuels like an oven or furnace can generate carbon monoxide. Even though you normally won’t have a problem, difficulties can arise when equipment is not regularly maintained or adequately vented. These mistakes can result in an accumulation of this dangerous gas in your interior. Generators and heating appliances are the most frequent causes for CO poisoning.

When in contact with minute levels of CO, you could notice fatigue, headaches, dizziness nausea, or vomiting. Continuous exposure to higher amounts may lead to cardiorespiratory failure, and potentially death.

Tips On Where To Place New Brunswick Carbon Monoxide Detectors

If your home is without a carbon monoxide detector, purchase one today. If possible, you ought to have one on every floor, and that includes basements. Here are several tips on where to place carbon monoxide detectors in New Brunswick:

  • Install them on each level, specifically in areas where you have fuel-burning appliances, such as furnaces, gas dryers, fireplaces, and water heaters.
  • Always have one within 10 feet of bedroom areas. If you only install one carbon monoxide detector, this is the place for it.
  • Position them about 10 to 20 feet from sources of CO.
  • Avoid affixing them right beside or above fuel-consuming appliances, as a non-hazardous amount of carbon monoxide may be discharged when they kick on and prompt a false alarm.
  • Attach them to walls at least five feet off the ground so they will measure air where inhabitants are breathing it.
  • Avoid putting them near windows or doors and in dead-air zones.
  • Install one in rooms above attached garages.

Check your CO detectors often and maintain them according to manufacturer instructions. You will usually need to replace units within five or six years. You should also make sure any fuel-consuming appliances are in in proper working order and have appropriate ventilation.